Aw11 free car spare parts build
Aw11 free car spare parts build
Coo coo... The vc is off at the powdercoaters and a bunch more brackets/parts going tomorrow. I just put a order in for a oem gasket set, and getting 2.5in sv3 midpipe .. Tomei poncams and plug n play mega squirt and 14x7 rpf1's ordering soon!!!
Re: Aw11 free car spare parts build
I still have the header and exhaust...Its the apexi sprial tech made the most power out of the other FWD/MR2 headers. Then a tanabe super mediallion muffler. Pm me im in garland texas if your interested.
Being a toyotaphile is hard work
1987 GTS Coupe
1985 Toyota 4 Runner Locked and Lifted
1995 4 Runner(sold)
1991 Hilux(never should have sold)
1985 Hilux(wrecked)
1985 GTS Hatch(sold)
1985 SR5 Coupe(sold)
1985 SR5 Coupe(sold)
1987 GTS Coupe
1985 Toyota 4 Runner Locked and Lifted
1995 4 Runner(sold)
1991 Hilux(never should have sold)
1985 Hilux(wrecked)
1985 GTS Hatch(sold)
1985 SR5 Coupe(sold)
1985 SR5 Coupe(sold)
Aw11 free car spare parts build
Ahh!! I'm sure I talked to either you or your friend on the phone and through txt.. I'll pm you my new number.. Maybe we can work something out.
Aw11 free car spare parts build
Been awhile. Parts started rolling in. I'm going to do a full rebuild of the motor. It's going to be all oem Toyota parts.
I really want to see what a fresh blacktop can do.
Still waiting on a bunch of stuff but in the meantime I got a air compressor and a sandblaster. I started cleaning up somethings by blasting it with walnut shells.
A little size comparison....
I really want to see what a fresh blacktop can do.
Still waiting on a bunch of stuff but in the meantime I got a air compressor and a sandblaster. I started cleaning up somethings by blasting it with walnut shells.
A little size comparison....
Aw11 free car spare parts build
Pretty red powder coat with clear coat
And before I cleaned the tb's
Powdercoated some parts silver and got the airbox ceramic coated in satin.
Aw11 free car spare parts build
Pulled the head. And cleaned the pistons. I was hoping for just new rings a hone and new bearings.... Looks like I gotta add a piston to the list. Bores look good though!
#4 looks like this!!!
Bores all look ok. Still have cross hatching.
I guess it don't matter but I hope the bearings are okay!
#4 looks like this!!!
Bores all look ok. Still have cross hatching.
I guess it don't matter but I hope the bearings are okay!
Re: Aw11 free car spare parts build
the bearing might have a little scorching but if they didnt spin your probably good.there cheap anyways.
[img]http://i300.photobucket.com/albums/nn17/mooreofalan/attachment-2-1-1-1-1.jpg[/img]
Aw11 free car spare parts build
Well head needs rebuilt and I got rings coming anyways.
It's going to day custom engines to be rebuilt.
I got all the valves out and head stripped. I used the toyotool valve remover. I bought the 20v specific one... And guess what! It didn't work!!! I had to add washers inside to push the seat down far enough to remove the retainers!! After that it's the best tool ever!!
Anyways I'm debating on whether to get those new Ferrera valves while rebuilding the head (supposed to flow way more cfm than stock) the valves are around 500$ the advantage of getting em now is I'm getting the head rebuilt anyways so there's no "additional" cost in getting them installed... Well here are some pics...
I also got my 9.5mm spark plug wires and my sv3power downpipe and test pipe!
It's going to day custom engines to be rebuilt.
I got all the valves out and head stripped. I used the toyotool valve remover. I bought the 20v specific one... And guess what! It didn't work!!! I had to add washers inside to push the seat down far enough to remove the retainers!! After that it's the best tool ever!!
Anyways I'm debating on whether to get those new Ferrera valves while rebuilding the head (supposed to flow way more cfm than stock) the valves are around 500$ the advantage of getting em now is I'm getting the head rebuilt anyways so there's no "additional" cost in getting them installed... Well here are some pics...
I also got my 9.5mm spark plug wires and my sv3power downpipe and test pipe!
Aw11 free car spare parts build
Welded up my sv3power downpipe and test pipe and sprayed it with some ceramic.
Aw11 free car spare parts build
Head is done... Well i got to shim it...
Port matched exhaust ( you shoulda seem the mess in there!!!) intake side was really close to matching the gasket so I left it.
Aw11 free car spare parts build
Someone pimped my block! With leopard print hahah it wipes right off.. Weird..
I Need to rent a puller to remove the timing gear then remove the oil pump, then the block goes off to get decked and honed. I guess bt20v rod bearings are different and are special order so another month waiting for parts from Japan. Those and main bearings were ordered today along with a toda oil pump gear and I'll be weight matching my pistons and rods along with the crank,flywheel and clutch assembly
Last edited by aj.hudson on Tue Apr 24, 2012 10:05 pm, edited 3 times in total.
Aw11 free car spare parts build
Double post
-
- Hades - Site Admin
- Posts: 7733
- Joined: Tue Sep 04, 2007 1:49 pm
- Location: On my hiney...in HOU
- Contact:
Re: Aw11 free car spare parts build
Great updates hudson. What's your ETA on the build?
Aw11 free car spare parts build
Thanks! The block should be dropped off tomorrow and finished by next Monday. I was told I NEED blacktop specific rod bearings but I'm reading elsewhere I can run small port rod bearings.... Anyways I am planning on being up and driving this time next month... Earlier if I can get parts faster.
Aw11 free car spare parts build
Rear trans mount done
And FYI your face isn't as strong as a 4age block....JDM tetanus ftw. Lol