Getting ready for nst event!

[85levin]

pics of progress

rebuilt calipers


and my diff housing ready for paint

[dr.occa]

looking forward to your findings on the panhard modifications 85.

[GTSRolla34]

The rear diff looks good. Looks like the new mount is close to where the cusco unit places it...maybe even a little lower.

[85levin]

if i remember correctly, cusco's rca is 36mm this one is 50mm

ok, cbr here are the pics of the water line kit.

[AznTKDmstr]

great build! i've been reading your thread now and it's getting me motivated to get back to work on my corolla! can't wait to see this baby in person!

[CBR_TOY]

thanks man... it's kind of hard to make out but are you running 2 block off plated?

and what did you do for your upper water neck?

[85levin]

thanks man, your words mean a lot to me, for someone to say that my build inspires is more than a compliment. it is the ae86 spirit passing on. lol. i have spent so much time to get the car to where it is i consider it priceless to me and it still is no where neer being my dream ae86.

it is an RS Chita water line kit
http://www.rhdjapan.com/rs-chita-ae86-2 ... -kit-23318" onclick="window.open(this.href);return false;

[mooreofit]

i may have some questions on the iac routing. are the bt and st the same?

[85levin]

ask away alan. though, i am not sure what the acronym "iac" stands for...

[dr.occa]

ask away alan. though, i am not sure what the acronym "iac" stands for...

idle air control

[85levin]

thanks jonas.

the valve it self is the same. now, i don't remember the design of the tube it plugs into on the st. send me a picture and i should be able to help you further.

[mooreofit]

stlove got it done. it was for his car. its now running and his throttle cable should be here before the event.


edit: he doesnt have a tach signal. where did you get your tach signal from and is the silvertops ignition\wire coloring the same?

[dr.occa]

stlove got it done. it was for his car. its now running and his throttle cable should be here before the event.


edit: he doesnt have a tach signal. where did you get your tach signal from and is the silvertops ignition\wire coloring the same?

there should be a wire from the ignitor connector that goes straight to the tach just like in the 16v GTS ignitor connector. (it's number 4 on that green connector - black wire - and is probably the same on the 20v ignitor connector. it should also be accessible at the bulkhead connector (no. 13 wire IIRC - the big bulk connector near the brake booster).

[85levin]

exactly right.

[NonStopTuning]

This is a really, really, cool thread!

I can't wait to see this car in person on 1/31!!!