Not so boso exhaust,. 6th attempt

Your Toyota

Moderators: dr.occa, CBR_TOY

mr.momo
Tourist
Posts: 42
Joined: Mon Feb 25, 2008 8:08 pm
Location: 290 and barker across from orlando
Contact:

Post by mr.momo »

simply put...sweeeeeeeeetttttttt..........

hvguy
Member
Posts: 1157
Joined: Thu Nov 15, 2007 4:36 pm
Location: Conroe tx

Post by hvguy »

projectredae86 wrote:oh so u doubled em up in the front as well as the back?
err, I have a set of retro-fitted 240SX ebay coilovers in the front. with tokico blues

and doubled up-cut springs in the back
[img]http://i37.tinypic.com/2m6keid.jpg[/img]

User avatar
nt66
Member
Posts: 1469
Joined: Thu Oct 04, 2007 10:05 am
Location: houston
Contact:

Post by nt66 »

hvguy wrote:
projectredae86 wrote:oh so u doubled em up in the front as well as the back?
err, I have a set of retro-fitted 240SX ebay coilovers in the front. with tokico blues

and doubled up-cut springs in the back
why dont you at least get tokico hts's or agx's at least then you can adjust stuff
http://www.facebook.com/willparsonsracing
www.willparsonsdrift.com

User avatar
Nasser
Member
Posts: 1003
Joined: Sun Nov 25, 2007 9:20 pm
Location: sugurland texas

Post by Nasser »

[quote="nt66
why dont you at least get tokico hts's or agx's at least then you can adjust stuff[/quote]

yeah i was thinking of getting some agx's and doubling em up like orlando i might just double them up as a cheap quick mod because i want to save up for some coilovers.

User avatar
CBR_TOY
Moderator
Posts: 4053
Joined: Wed Aug 15, 2007 10:00 pm
Location: under the 86
Contact:

Post by CBR_TOY »

wow..... ebay
type in ae86 coilover
buy the blue ones that are cheap(55 shipped)
next look up mr2 agx
buy the fronts that are 175 shipped
ask someone to cut and weld your casings to fit with the coils

you're done.

jonas did mine for me.

Image







then i bought tien camber plates and top hats from www.passracing.com
cheap coilovers.



then you buy swift or TRD rear springs for around 175 shipped
then get camaro rear agx's for cheap also.

but make sure you save up first and NEVER DOUBLE SPRINGS!!!!!!!!!!!!!!!!!!!!!!!!!!
JDM AE86/AE92


User avatar
nt66
Member
Posts: 1469
Joined: Thu Oct 04, 2007 10:05 am
Location: houston
Contact:

Post by nt66 »

Rob I think if you upgrade to tokico hts it will make a huge diffrence I was talking to john russkoff and he said he was able to tell a huge diffrence when he went from agx to hts
http://www.facebook.com/willparsonsracing
www.willparsonsdrift.com

User avatar
Nasser
Member
Posts: 1003
Joined: Sun Nov 25, 2007 9:20 pm
Location: sugurland texas

Post by Nasser »

i wish i had money for greddy coils :( i can get the megan racing coils which are the exact same and made in the same factory for 900 shipped some guy named Cyrus runs them on his 86 and they seem to preform very well you use your stock spindles and i think the shocks aren't adjustable but it is basically the same exact setup but its meant to be more affordable.

cyrus is the one in the silver coupe with 16v itb's. <embed id="VideoPlayback" type="application/x-shockwave-flash" src="http://video.google.com/googleplayer.sw ... 2516&hl=en" flashvars=""> </embed>
Last edited by Nasser on Wed Mar 12, 2008 7:29 pm, edited 1 time in total.

User avatar
nt66
Member
Posts: 1469
Joined: Thu Oct 04, 2007 10:05 am
Location: houston
Contact:

Post by nt66 »

projectredae86 wrote:i wish i had money for greddy coils :( i can get the megan racing coils which are the exact same and made in the same factory for 900 shipped some guy named Cyrus runs them on his 86 and they seem to preform very well you use your stock perches and i think the shocks aren't adjustable but it is basically the same exact setup but its meant to be more affordable.

cyrus is the one in the silver coupe with 16v itb's. <embed id="VideoPlayback" type="application/x-shockwave-flash" src="http://video.google.com/googleplayer.sw ... 2516&hl=en" flashvars=""> </embed>
yeah they are NOT the same or made in the same factory whoever told you that is full of it. You have to weld your old spindles on to the megan's, ect ect
http://www.facebook.com/willparsonsracing
www.willparsonsdrift.com

User avatar
Nasser
Member
Posts: 1003
Joined: Sun Nov 25, 2007 9:20 pm
Location: sugurland texas

Post by Nasser »

the greddy coils cost like 1,500 eek :/ im going to buy t3 4 links and a pan hard bar before i get coils i hope i get a job soon thou or i am a sitting duck.

Overdrift
Member
Posts: 653
Joined: Thu Nov 22, 2007 4:36 pm

Post by Overdrift »

CBR_TOY wrote:wow..... ebay
type in ae86 coilover
buy the blue ones that are cheap(55 shipped)
next look up mr2 agx
buy the fronts that are 175 shipped
ask someone to cut and weld your casings to fit with the coils

you're done.

jonas did mine for me.

Image






then i bought tien camber plates and top hats from www.passracing.com
cheap coilovers.



then you buy swift or TRD rear springs for around 175 shipped
then get camaro rear agx's for cheap also.

but make sure you save up first and NEVER DOUBLE SPRINGS!!!!!!!!!!!!!!!!!!!!!!!!!!

Only problem is.... what is the spring rate on those ebay coilovers? Every ebay coilover I've seen is cheap and sucks ass, its only good for making the car look good. The spring rate is the same for the front and rear on alot of the cheap sets, the spring rate is often low too.

hvguy
Member
Posts: 1157
Joined: Thu Nov 15, 2007 4:36 pm
Location: Conroe tx

Post by hvguy »

actually I did those for you =)

jonas brought them over :lol:

and I have those on the front-- =)

but I wanna pay for the name

and Ive seen wills and I like it.


greddy is still my choice


here's mine
Image
[img]http://i37.tinypic.com/2m6keid.jpg[/img]

User avatar
nt66
Member
Posts: 1469
Joined: Thu Oct 04, 2007 10:05 am
Location: houston
Contact:

Post by nt66 »

orlando yours is not the same it really sucks ass because you are using the stock strut
http://www.facebook.com/willparsonsracing
www.willparsonsdrift.com

landslideATX
VIP Member
Posts: 1518
Joined: Mon Dec 31, 2007 12:00 pm
Location: ATX
Contact:

Post by landslideATX »

thats a pretty sick video. as far as the 4 link i went with tc sportline and they are working out great for mw so far. i have the t3 lat bar. i go the t3 lat bar first and it made a hell of a difference. ounce i put the 4 link on it made it even better. i'm running the kyb agx's and now all i have to do is get a better spring rate. i have some cheap ebay 2" drop springs but they are all mushy and shit already.
[img]http://i9.tinypic.com/832gfm9.jpg[/img]
"Now their greatest enemy is chlamydia, a disease also found in humans. This disease is transmitted by sexual contact, and it has killed over three thousand koalas in the last year."

User avatar
nt66
Member
Posts: 1469
Joined: Thu Oct 04, 2007 10:05 am
Location: houston
Contact:

Post by nt66 »

landslideATX wrote:thats a pretty sick video. as far as the 4 link i went with tc sportline and they are working out great for mw so far. i have the t3 lat bar. i go the t3 lat bar first and it made a hell of a difference. ounce i put the 4 link on it made it even better. i'm running the kyb agx's and now all i have to do is get a better spring rate. i have some cheap ebay 2" drop springs but they are all mushy and shit already.
are you running the short strokes or stock height struts?
http://www.facebook.com/willparsonsracing
www.willparsonsdrift.com

User avatar
nt66
Member
Posts: 1469
Joined: Thu Oct 04, 2007 10:05 am
Location: houston
Contact:

Post by nt66 »

double post fail :(
http://www.facebook.com/willparsonsracing
www.willparsonsdrift.com

Post Reply