DIY: Quick-N-EZ Compact Evap Canister
Posted: Sun Oct 25, 2015 10:33 am
I just made use of the Quick-N-EZ Oil Catch design.
2" PVC Components from your local hardware store:
1. Threaded Cap
2. Threaded Flush Cap
3. Threaded Coupler
4. Pipe section cut to desired length
5. Vacuum Check Valve
Pick up Activated Carbon Pellets or Filter Packs from a local Aquarium Supply store and place them in the (4)Pipe section of your canister.
Create perforations in the (2)Threaded Flush Caps. Assemble the (3)Threaded Couplers to the (4)Pipe section prepping with PVC primer then affixing with PVC cement. The rest should be self explanatory.
2" PVC Components from your local hardware store:
1. Threaded Cap
2. Threaded Flush Cap
3. Threaded Coupler
4. Pipe section cut to desired length
5. Vacuum Check Valve
Pick up Activated Carbon Pellets or Filter Packs from a local Aquarium Supply store and place them in the (4)Pipe section of your canister.
Create perforations in the (2)Threaded Flush Caps. Assemble the (3)Threaded Couplers to the (4)Pipe section prepping with PVC primer then affixing with PVC cement. The rest should be self explanatory.