a couple of electrical questions....

Wiring, harnesses, factory and after market management, ignition, etc...

Moderators: dr.occa, CBR_TOY

Post Reply
ColorollaAE86
Tourist
Posts: 25
Joined: Mon Dec 03, 2012 1:48 pm
Location: Corpus Christi, TX

a couple of electrical questions....

Post by ColorollaAE86 »

My stop fuse keeps blowing for some odd reason. How do I check the brake light switch? Also, how do I wire up an electric cooling fan on my GTS to get rid of my flex blade fan?

dr.occa
Hades - Site Admin
Posts: 7733
Joined: Tue Sep 04, 2007 1:49 pm
Location: On my hiney...in HOU
Contact:

Re: a couple of electrical questions....

Post by dr.occa »

The brake light switch is a momentary switch. The way it works is it's constantly depressed (so the bridge to ground is interrupted) until you used the brakes (then the bridge to ground is completed). It's a simple 2 wire connection.

Check for shorts in any of the wiring (don't forget either side of the fuse)

Make sure the proper fuse size is being used.

Make sure the proper bulb wattage is being used as well.

ga_goosh
VIP Member
Posts: 1589
Joined: Wed Mar 26, 2008 6:52 pm

Re: a couple of electrical questions....

Post by ga_goosh »

here is a wiring diagram for the electric fan to work automatically. it uses a thermostat cover from an ae82 or an ae92. both bolt up to the ae86 and have a fan switch built in.

wiring
Image

ae92 thermostat housing with sensor
Image
I <3 my AE86

4AG Manual
AE86 FSM

User avatar
86boy
Member
Posts: 1018
Joined: Thu Mar 17, 2011 8:13 pm
Location: Texas

Re: a couple of electrical questions....

Post by 86boy »

sort of off topic... but not really. Goosh do you know the part number for that switch?! I'm pretty sure the ae92 thermostat is the 48mm as well that's same as the GTS thermostats.
      "Praise the Lowered"
          _____________
       // ---------------- \\
   _// ______________ \\_
 /__________|__________\
|OOO _____________ OOO|
 \________|1964|_______/
    ¯¯                          ¯¯

ga_goosh
VIP Member
Posts: 1589
Joined: Wed Mar 26, 2008 6:52 pm

Re: a couple of electrical questions....

Post by ga_goosh »

yes the thermostat itself is the same. the difference is the rubber gromet gasket that is included with the ae92 thermostat. im not sure what the pn is for the thrmo switch.

for the switch itself i dont think toyota has a part number for it. I just called my local toyo dealer and the parts guy couldnt find a part number either. he did say the fan switch could be included with the thermostat housing.

if this is the case the ae92 thermo housing pn = 16321-16030
ae82 thermo housing pn = 16321-15010
I <3 my AE86

4AG Manual
AE86 FSM

User avatar
86boy
Member
Posts: 1018
Joined: Thu Mar 17, 2011 8:13 pm
Location: Texas

Re: a couple of electrical questions....

Post by 86boy »

ga_goosh wrote:yes the thermostat itself is the same. the difference is the rubber gromet gasket that is included with the ae92 thermostat. im not sure what the pn is for the thrmo switch.

for the switch itself i dont think toyota has a part number for it. I just called my local toyo dealer and the parts guy couldnt find a part number either. he did say the fan switch could be included with the thermostat housing.

if this is the case the ae92 thermo housing pn = 16321-16030
ae82 thermo housing pn = 16321-15010

ha! that would make sense why I can't find that switch! Thanks for the part number sir!

To the O.P. the diagram goosh posted up about the electric fans works. Also check here for part numbers and relays that are easily obtained at your local parts store. Take a look at the link below for that information. It's on the 3rd post. cost you about 10 dollars or so for the relays. pickup some connectors and wire and you should be good to go.

viewtopic.php?f=52&t=4810
      "Praise the Lowered"
          _____________
       // ---------------- \\
   _// ______________ \\_
 /__________|__________\
|OOO _____________ OOO|
 \________|1964|_______/
    ¯¯                          ¯¯

Post Reply