let alone get a driveshaft made and a custom clutch ordered.where to source parts t50 parts?
where to source parts t50 parts?
I currently have the almighty issue of 2nd gear popping out. I can gently hold it and it stays in. SOOOOO my question. Does anyone know where to source synchros, bearings, etc for the t50? I would probably end up just replacing 1st and 2nd due to 2nd having the issue and 1st gets used a lot. Haven't had time to get the W55 in my car yet.. let alone get a driveshaft made and a custom clutch ordered.
let alone get a driveshaft made and a custom clutch ordered. "Praise the Lowered"
_____________
// ---------------- \\
_// ______________ \\_
/__________|__________\
|OOO _____________ OOO|
\________|1964|_______/
¯¯ ¯¯
_____________
// ---------------- \\
_// ______________ \\_
/__________|__________\
|OOO _____________ OOO|
\________|1964|_______/
¯¯ ¯¯
Re: where to source parts t50 parts?
prolly cheaper to find a whole t50 GTS and Sr5 are identical
Being a toyotaphile is hard work
1987 GTS Coupe
1985 Toyota 4 Runner Locked and Lifted
1995 4 Runner(sold)
1991 Hilux(never should have sold)
1985 Hilux(wrecked)
1985 GTS Hatch(sold)
1985 SR5 Coupe(sold)
1985 SR5 Coupe(sold)
1987 GTS Coupe
1985 Toyota 4 Runner Locked and Lifted
1995 4 Runner(sold)
1991 Hilux(never should have sold)
1985 Hilux(wrecked)
1985 GTS Hatch(sold)
1985 SR5 Coupe(sold)
1985 SR5 Coupe(sold)
Re: where to source parts t50 parts?
Oreilly Autoparts. I was actually looking at parts for the trans tonight. We offer a full rebuild kit. may not be in stock but should be able to order it within the week.
Re: where to source parts t50 parts?
werd. I found another full good t50. SO I have some parts. 2nd gear's hub/gear is trashed and 3rd gear synchro is worn hardcore. the rest seems to be ok.
"Praise the Lowered"
_____________
// ---------------- \\
_// ______________ \\_
/__________|__________\
|OOO _____________ OOO|
\________|1964|_______/
¯¯ ¯¯
_____________
// ---------------- \\
_// ______________ \\_
/__________|__________\
|OOO _____________ OOO|
\________|1964|_______/
¯¯ ¯¯
Re: where to source parts t50 parts?
possible to order rebuild kit , bearings and synchros for the T50?
-
dr.occa
- Hades - Site Admin
- Posts: 7733
- Joined: Tue Sep 04, 2007 1:49 pm
- Location: On my hiney...in HOU
- Contact:
Re: where to source parts t50 parts?
You should still be able to order replacement trans parts from Toyota. If O'Reilly has 'em well then there ya go.
Re: where to source parts t50 parts?
the ae86 trans number is actually the t51 so make sure you get the right kit even if you go to oreilys the t50 is the 79-81 corolla and the t50A is the corolla 81-83. it is a little different then the ae86 t51.
corolla 73-81 RWD t50 kit with syncros - 165.99 kit with out sincros - call for availability
http://cobratransmission.com/index.php? ... ath=2_2067
corolla 81-83 RWD t50A kit with syncros - 165.99 kit with out sincros - call for availability
http://cobratransmission.com/index.php? ... ath=2_2068
corolla 83-87 RWD T51
it is a bit more for the t51 and this kit doesnt have the input bearing - with out syncros $429.99 with syncros call for availability.
http://cobratransmission.com/index.php? ... ath=2_2069
there is this guy selling a kit on c4ag. it also does not include the input shaft bearing for 300 shipped
im not sure if he still has any of these tho
http://forums.club4ag.com/zerothread?id=106654
corolla 73-81 RWD t50 kit with syncros - 165.99 kit with out sincros - call for availability
http://cobratransmission.com/index.php? ... ath=2_2067
corolla 81-83 RWD t50A kit with syncros - 165.99 kit with out sincros - call for availability
http://cobratransmission.com/index.php? ... ath=2_2068
corolla 83-87 RWD T51
it is a bit more for the t51 and this kit doesnt have the input bearing - with out syncros $429.99 with syncros call for availability.
http://cobratransmission.com/index.php? ... ath=2_2069
there is this guy selling a kit on c4ag. it also does not include the input shaft bearing for 300 shipped
im not sure if he still has any of these tho
http://forums.club4ag.com/zerothread?id=106654
Re: where to source parts t50 parts?
rockauto.com carries bearings... for a lot less than a lot of places want for those damn thing. I think they had all but the center bearing on the output shaft (i can't remember which shaft it's on), but it was like 150 for the 4 outter ones.
"Praise the Lowered"
_____________
// ---------------- \\
_// ______________ \\_
/__________|__________\
|OOO _____________ OOO|
\________|1964|_______/
¯¯ ¯¯
_____________
// ---------------- \\
_// ______________ \\_
/__________|__________\
|OOO _____________ OOO|
\________|1964|_______/
¯¯ ¯¯
Re: where to source parts t50 parts?
I can get those parts thru my TOR hookup, cheaper than the dealer.