www.86garage.com

Alright I have an 82 2 door corolla that I plan on doing an SR swap with. I recently picked up a celica/supra rear. Will this rear work with the T3 4 link and panhard kit for the ae86? From what Ive read a GTS rear bolts right in so I imagine it would fit the same. I also plan on getting an ae86 front crossmember which bolts right up. Id also like to get an AW11 rack but what else would I need for this rack to work with my car? Ive read about the mk3 supra intermediate shaft but that was for the ae86. And does anyone know if the ae86 steering column will swap over? If so then that would be easier.

Please post pics if you can and help me! Lol Ive tried researching and am having a very hard time finding the information I need.

The Celi-Sup rear end needs to have the 4 link mounting points re-located to where the TE/AE mounts are normally on their respective rear end housings.

Thank you very much for your reply, so basically just cut them off and re-weld them in the correct locations

chaddy wrote:Thank you very much for your reply, so basically just cut them off and re-weld them in the correct locations

Haha nice! And thanks again, anyone have any experience with the aw11 rack?

AW11 rack is awesome -- have one in my levin right now. Only thing is, I think you're gonna need a 4a crossmember tho -- not sure if it'll fit the 2T/3T crossmember...

The TE uses a steering box, pitman & idler arms. The AE72 would have the same x-member as the AE86.

I plan on swapping an ae86 xmember in and using all 86 front suspension/brakes/steering etc. so thats all I need for that rack to work? Besides the supra intermediate shaft and ae86 steering column.

you will need the aw11 ujoint and either the t3 adaptor bushing or the aw11 manual steering rack brackets. also the aw11 rack is a little shorter internally and makes the angle on the passenger side a little less IIRC but it isnt too noticable

thanks a lot for the input guys, definitely helped