Page 1 of 1
please show me vacuum lines to your intake 20 valve
Posted: Thu Mar 24, 2011 3:30 pm
by 87inaustin
hello i am doing a 20 valve silver top swap in my ae86 and final steps routing the vacuum lines and how you connected them suck as a three way splitter also any austin dudes do this swap pm me id like to chat about the after math
Re: please show me vacuum lines to your intake 20 valve
Posted: Thu Mar 24, 2011 4:03 pm
by dr.occa
Post pictures of what vacuum lines you're needing a help on routing.
Re: please show me vacuum lines to your intake 20 valve
Posted: Thu Mar 24, 2011 6:31 pm
by 87inaustin
sorry , says its a little to big of a picture . but all i really need to know is what do i do with the <AC> and <PS 1 and PS 2> lines when i am not running ac or ps
Re: please show me vacuum lines to your intake 20 valve
Posted: Fri Mar 25, 2011 12:14 am
by dr.occa
Cap 'em.
Re: please show me vacuum lines to your intake 20 valve
Posted: Fri Mar 25, 2011 12:52 am
by 87inaustin
that sounds like a good idea thanks
Re: please show me vacuum lines to your intake 20 valve
Posted: Fri Mar 25, 2011 10:40 am
by 87inaustin
ok last question about the vacuum the brake booster is connected to a banjo bolt on both sides of the throttle bodies ?!?!?!!? ...
and there is a 2 1/2 - 3 inch skinny pipe that had a hose hooked too it its about one inch lower than the tranny side last throttle ?!?!?!
both questions just as important
Re: please show me vacuum lines to your intake 20 valve
Posted: Fri Mar 25, 2011 10:52 am
by dr.occa
87inaustin wrote:ok last question about the vacuum the brake booster is connected to a banjo bolt on both sides of the throttle bodies ?!?!?!!? ...
and there is a 2 1/2 - 3 inch skinny pipe that had a hose hooked too it its about one inch lower than the tranny side last throttle ?!?!?!
both questions just as important
Is it a curved pipe that's about .5" diameter? Cap it.
Re: please show me vacuum lines to your intake 20 valve
Posted: Fri Mar 25, 2011 4:28 pm
by CBR_TOY
http://forums.club4ag.com/zerothread?id=25025" onclick="window.open(this.href);return false;
Re: please show me vacuum lines to your intake 20 valve
Posted: Sun Mar 27, 2011 11:28 pm
by 87inaustin
last two pics from link are good examples hard to read with the disorganized maroon line please relabel with better labels please ..//