please show me vacuum lines to your intake 20 valve

[87inaustin]

hello i am doing a 20 valve silver top swap in my ae86 and final steps routing the vacuum lines and how you connected them suck as a three way splitter also any austin dudes do this swap pm me id like to chat about the after math

[dr.occa]

Post pictures of what vacuum lines you're needing a help on routing.

[87inaustin]

sorry , says its a little to big of a picture . but all i really need to know is what do i do with the <AC> and <PS 1 and PS 2> lines when i am not running ac or ps

[dr.occa]

Cap 'em.

[87inaustin]

that sounds like a good idea thanks

[87inaustin]

ok last question about the vacuum the brake booster is connected to a banjo bolt on both sides of the throttle bodies ?!?!?!!? ...



and there is a 2 1/2 - 3 inch skinny pipe that had a hose hooked too it its about one inch lower than the tranny side last throttle ?!?!?!

both questions just as important

[dr.occa]

ok last question about the vacuum the brake booster is connected to a banjo bolt on both sides of the throttle bodies ?!?!?!!? ...



and there is a 2 1/2 - 3 inch skinny pipe that had a hose hooked too it its about one inch lower than the tranny side last throttle ?!?!?!

both questions just as important

Is it a curved pipe that's about .5" diameter? Cap it.

[CBR_TOY]

http://forums.club4ag.com/zerothread?id=25025" onclick="window.open(this.href);return false;

[87inaustin]

last two pics from link are good examples hard to read with the disorganized maroon line please relabel with better labels please ..//