Page 1 of 1
20v Oil Filter
Posted: Sun Jan 03, 2010 1:23 am
by BKH808
Heard you can use a '89 supra one for ST and BT. Does it matter if it's the N/A or Turbo MK3?
Re: 20v Oil Filter
Posted: Sun Jan 03, 2010 2:36 am
by mandm177
90915YZZF1
go to toyota dealership and ask for that part number. should work just fine for a BT
Re: 20v Oil Filter
Posted: Sun Jan 03, 2010 1:08 pm
by dr.occa
BKH808 wrote:Heard you can use a '89 supra one for ST and BT. Does it matter if it's the N/A or Turbo MK3?
that should be the same toyota part number for 88-89 AW11 (i know, it's still the 4AGE. take it up with Toyota
) as well as the 91-95 3SGTE SW20. i always recommend WIX personally. pick one up at o'reilly's for about $7. the p/n is: 51396
Re: 20v Oil Filter
Posted: Wed Jan 06, 2010 4:32 am
by BKH808
Cool thanks! Also looking for the part number for a Rear main seal for the Blacktop from Toyota. Got to go make a big order on one visit.
Re: 20v Oil Filter
Posted: Wed Jan 06, 2010 10:38 am
by mandm177
try:
SEAL, ENGINE REAR OIL
90311‑70007 4A*, 5AFE..AE11* 1 $33.84
GASKET, ENGINE REAR OIL SEAL RETAINER
11383‑16010 4A*, 5AFE..AE11* 1 $4.06
not sure if you'll need both though.
Re: 20v Oil Filter
Posted: Wed Jan 06, 2010 12:43 pm
by dr.occa
^what mark suggested.
the front and rear oil seals are the same with the 16v to the 20v.
Re: 20v Oil Filter
Posted: Wed Aug 17, 2011 11:42 am
by McKenney
You can also use the 1UZFE oil filter on the 4AGE's. It's bigger and clears fine. I run one on mine and add 1/2 quart more oil to it.
Re: 20v Oil Filter
Posted: Thu Aug 18, 2011 10:32 am
by dr.occa
Would this be ALL 1UZ years?
Re: 20v Oil Filter
Posted: Thu Aug 18, 2011 11:13 am
by 87inaustin
what is the part number for a silver top please