Turboing bike carbs

[Teamsdmf]

Alright so ive been looking on line every where at this and are thinking about going that route, but my main question is how to pressurize the carbs. now ive read alot on how to do it and for the most part get it, I just want to see how some one pressurized the float bowls like a picture...im a picture kind of guy lol I know you got to run them to a pitot tube and pretty much get how to do it except them damn carbs. if some could get me a clear picture of the carbs with all vacuum lines running to them I would be much obliged ive seen kevlar corollas setup and just need a clear shot of were tje lines go to the carbs off the pitot tube...... I have pretty much everything else except a bov intercooler piping and the manifold to get this setup going now I wont be running much boost maybe 7 pounds max

[86boy]

Mind you I have not done anything pertaining to this, but I have done a little research on it out of curiosity haha. You'll find more information regarding this if you check out some old skool hot rod forums. carb'd v8's with turbos are a little more common than a 4age carb'd and turbo'd, but the concept is the same that's all that matters. These are what I had saved in my "favorites" on my phone's web browser regarding this. lol So i'll share what I found before.

Here's some pictures of something similiar to what you are wanting to do.
http://forums.club4ag.com/zerothread?id=30857

Here's some information on carb turbo setup.
http://beforeblack.net/conversion.htm

86 isuzu carb-turbo and some information.
http://www.homemadeturbo.com/forced-ind ... tup-95522/

forum section dedicated to the blow through turbo setup. LOTS of info in there.
http://www.theturboforums.com/smf/carbu ... hh6nan26h6

[dr.occa]

Check out "Maximum Boost" by Corky Bell.

[Mexd1_Sicario]

im sorry but i had to giggle a little when i saw that video in the bottom of you post. Sorry Tedd...

[dr.occa]

Also look up kevlar corolla's old turbo R1 carb setup around here.