16v Guru's...Lend me your ears! (Starting issues)

[bt20v]

ok so did you check the timing marks on the cams? I am really interested to see if that is correct.

[c4ptiv3]

ok so did you check the timing marks on the cams? I am really interested to see if that is correct.

not yet, I won't be able to look at that til atleast Sunday. I work 12 hour shifts until then. I will post the results when I check them.

That being said I'm almost certain it's distributor timing since I can't find shit for info on how to stab it.

[bt20v]

put #1 cyl at top dead center and point the rotor at the number 1 post on the cap and then run the wires per the firing order

[c4ptiv3]

cams were incorrect, fixed that and got distributor timing dead on and it started right up. Cylinder 4 injector is no pulsing so I need to find a replacement. Pretty excited, thanks for the help everyone!

[dr.occa]

:tu::tu::tu::tu::tu::tu:

Let's see it!

[c4ptiv3]

Only pic I snapped. Check out those fresh newly powdercoated valve covers!!

[dr.occa]

Great man! Any chance of a short motion picture?

[c4ptiv3]

A few on my friends phone, ill try to post one tomorrow

[bt20v]

awesome glad you got it fixed

[c4ptiv3]

Thank you!

Anyone in DFW have some late model injectors that require the resistor pack!?