Seeking GtS Hatchback
Seeking GtS Hatchback
As the Subject says, w/ or w/out mods, I posted on Club4ag but I'm not sure if the newer forum allows for private messages... it was worth a shot.
____________
Thanks again,
Dorikun
Thanks again,
Dorikun
-
dr.occa
- Hades - Site Admin
- Posts: 7733
- Joined: Tue Sep 04, 2007 1:49 pm
- Location: On my hiney...in HOU
- Contact:
Re: Seeking GtS Hatchback
why another 86?Dorikun wrote:As the Subject says, w/ or w/out mods, I posted on Club4ag but I'm not sure if the newer forum allows for private messages... it was worth a shot.
what happened to the red hatch w/ the oni's?
Re: Seeking GtS Hatchback
I feel the loooove!!!dr.occa wrote:why another 86?Dorikun wrote:As the Subject says, w/ or w/out mods, I posted on Club4ag but I'm not sure if the newer forum allows for private messages... it was worth a shot.
what happened to the red hatch w/ the oni's?
AE86 Lifer.
I dunno, just do, I really like to tinker I guess, given the chance that is.
I still have the Hachi bro, it's chillin.
____________
Thanks again,
Dorikun
Thanks again,
Dorikun
Actually I'm going Mustang Cobra onry, the only thing Cobra's and the Japanese have in common is that Cobra Kai will never die! I'm just kidding, I was trying to sound cool by saying I'm leaving the import scene since everyone cool is leaving or dying... Mr. Sakurai from Japan died March 16th Japan time... I hope they do the new AE86 right... I don't think they will... I'm having high doubts.
____________
Thanks again,
Dorikun
Thanks again,
Dorikun
a rivet on widebody kit will fix its problem =) along with some wheel spacers and fender flares, good to goDorikun wrote:Actually I'm going Mustang Cobra onry, the only thing Cobra's and the Japanese have in common is that Cobra Kai will never die! I'm just kidding, I was trying to sound cool by saying I'm leaving the import scene since everyone cool is leaving or dying... Mr. Sakurai from Japan died March 16th Japan time... I hope they do the new AE86 right... I don't think they will... I'm having high doubts.
[img]http://i37.tinypic.com/2m6keid.jpg[/img]
I found what you need Erick
$14,000 OBO
http://forums.club4ag.com/zerothread?id=23249
If you want to make a car look like this it would cost you (cheapest way)
HTS SHOCKS $300
TRD SPRING (REAR) $120
Height adjustable CAMBER PLATE $100
Ground control spring (FRONT) $100
TRD BUSHING $160
SHORT SHIFTER $150
CLUTCH W/LIGHT WEIGHT FLYWHEEL $150
GZE MOTOR $1500
KAAZ 2 WAY LSD $400
BRAKE LINE W/CLUTCH LINE $80
NARDI WHEELS $120
STEERING WHEEL HUB $30
ALL GAGES $50
FRONT AND REAR BRAKES $200
TRD SWAY BAR $100
NEW BATTERY $40
TWO Bucket SEAT $100
ROLL BAR $150
Cusco FRONT TOWER BAR $120
Cusco REAR BAR $100
SHIFT KNOB - - -
HKS FILTER - - -
HKS EXHAUST $200
TRD MOTOR MOUNT $80
CUSCO TRANS MOUNT $60
LSD BEARING $20
NEW FUEL PUMP $20
NEW SPARK PLUG - - -
HKS CAM GEAR $150
Over side CRANK PULLEY $100
NEW WATER PUMP $50
NEW OIL SEAL - - -
NEW T/BELT $15
NEW FAN BELT - - -
KOYO RADIATOR $200
NEW LEVIN FRONT END $1500 used
ZENKI REAR BUMPER $300
TRD KIT $800
Rear TRD WING $100
PAINT JOB $1000
NEW BRAKE MASTER CYLINDER $40
NEW CLUTCH MASTER $20
New REDLINE TAIL LIGHT $200
RADIO W/POLK SPEAKER $50
Watanabe 15x9.5 -19 $2000
New 205-50-15 toyo RA-1 $200
New Watanabe 15x10 -25
New 225-50-15 toyo RA-1
LOCK NUT
TOW HOOK $80
NEW S/C OIL
S/C PIPE
TRD HEADER $150
VALVE COVER GASKET
TRD OIL CAP $30
RCA $100
Cusco PAN HARD BAR $100
Non power steering rack-n-pinion with new boots.
it added up to 11,635 already the price I estimate is a used price that maybe take months watching the f/s board and it would take months just to put everything together plus you need to DIY to save all the labor.
What do you think ? Sell your Evo then lol
Erick you saw all my parts to build the N2 look just like this one but it would take me maybe next year or 2 to finish that project because I decide to do everything on my own.
Let say if you make $20/ hr for your job (which is easier than working on car) If you work on car everyday for 4 hr for 3 month. Your time worth $20x4x30x3 =$7200. You can save your time and hassle by work little bit harder at your job and pay somebody to work on the car maybe $2-$3000 in tis case that labor included in the sale price. Since you do not have time and ability to work on car (because you so far away) but you have a real good job this would be the only way to get a nice car but it have to be at good price and this is good price.
http://forums.club4ag.com/zerothread?id=22844
$14,000 OBO
http://forums.club4ag.com/zerothread?id=23249
If you want to make a car look like this it would cost you (cheapest way)
HTS SHOCKS $300
TRD SPRING (REAR) $120
Height adjustable CAMBER PLATE $100
Ground control spring (FRONT) $100
TRD BUSHING $160
SHORT SHIFTER $150
CLUTCH W/LIGHT WEIGHT FLYWHEEL $150
GZE MOTOR $1500
KAAZ 2 WAY LSD $400
BRAKE LINE W/CLUTCH LINE $80
NARDI WHEELS $120
STEERING WHEEL HUB $30
ALL GAGES $50
FRONT AND REAR BRAKES $200
TRD SWAY BAR $100
NEW BATTERY $40
TWO Bucket SEAT $100
ROLL BAR $150
Cusco FRONT TOWER BAR $120
Cusco REAR BAR $100
SHIFT KNOB - - -
HKS FILTER - - -
HKS EXHAUST $200
TRD MOTOR MOUNT $80
CUSCO TRANS MOUNT $60
LSD BEARING $20
NEW FUEL PUMP $20
NEW SPARK PLUG - - -
HKS CAM GEAR $150
Over side CRANK PULLEY $100
NEW WATER PUMP $50
NEW OIL SEAL - - -
NEW T/BELT $15
NEW FAN BELT - - -
KOYO RADIATOR $200
NEW LEVIN FRONT END $1500 used
ZENKI REAR BUMPER $300
TRD KIT $800
Rear TRD WING $100
PAINT JOB $1000
NEW BRAKE MASTER CYLINDER $40
NEW CLUTCH MASTER $20
New REDLINE TAIL LIGHT $200
RADIO W/POLK SPEAKER $50
Watanabe 15x9.5 -19 $2000
New 205-50-15 toyo RA-1 $200
New Watanabe 15x10 -25
New 225-50-15 toyo RA-1
LOCK NUT
TOW HOOK $80
NEW S/C OIL
S/C PIPE
TRD HEADER $150
VALVE COVER GASKET
TRD OIL CAP $30
RCA $100
Cusco PAN HARD BAR $100
Non power steering rack-n-pinion with new boots.
it added up to 11,635 already the price I estimate is a used price that maybe take months watching the f/s board and it would take months just to put everything together plus you need to DIY to save all the labor.
What do you think ? Sell your Evo then lol
Erick you saw all my parts to build the N2 look just like this one but it would take me maybe next year or 2 to finish that project because I decide to do everything on my own.
Let say if you make $20/ hr for your job (which is easier than working on car) If you work on car everyday for 4 hr for 3 month. Your time worth $20x4x30x3 =$7200. You can save your time and hassle by work little bit harder at your job and pay somebody to work on the car maybe $2-$3000 in tis case that labor included in the sale price. Since you do not have time and ability to work on car (because you so far away) but you have a real good job this would be the only way to get a nice car but it have to be at good price and this is good price.
http://forums.club4ag.com/zerothread?id=22844
I'm asking for an email to be sent to me or a way for me to contact them basically at the moment, I saw these cars but the post names either changed or no one posted on them for a while and they kept dropping. Let me know if you know these guys or can get a hold of them for me.pecx wrote:I found what you need Erick
____________
Thanks again,
Dorikun
Thanks again,
Dorikun
his email kimae86@hotmail.com