Search found 97 matches
- Wed Jan 12, 2011 5:48 am
- Forum: Engine - 20V
- Topic: 20 valve ITB's
- Replies: 13
- Views: 1182
Re: 20 valve ITB's
yes I made it myself and it has no deflection at all even with suddenly forcing all my body weight on it so I did overdo it a bit. It's made from 4130 (Cro-Mo) as I think aluminium is a poor material to make braces from and is only used because of how cost effective it is. Here is test pannel from t...
- Tue Jan 11, 2011 4:55 pm
- Forum: Engine - 20V
- Topic: 20 valve ITB's
- Replies: 13
- Views: 1182
Re: 20 valve ITB's
you can run the airbox, it just takes a bit of work to make it fit:
![Image](http://i127.photobucket.com/albums/p143/daunderdweller/ae86other/engine-bay01.jpg)
![Image](http://i127.photobucket.com/albums/p143/daunderdweller/ae86other/engine-bay01.jpg)
- Mon Jan 10, 2011 6:00 pm
- Forum: Engine - 20V
- Topic: 20 valve ITB's
- Replies: 13
- Views: 1182
Re: 20 valve ITB's
they come with them originally. So just source the original manifold and throttles
- Thu Dec 23, 2010 1:26 am
- Forum: Engine - 16V
- Topic: Manganese Bronze Valve Guides: Are there any benefits?
- Replies: 6
- Views: 448
Re: Manganese Bronze Valve Guides: Are there any benefits?
if you replacing the valves it's a very point you make, well said
- Wed Dec 22, 2010 4:48 pm
- Forum: Engine - 16V
- Topic: Manganese Bronze Valve Guides: Are there any benefits?
- Replies: 6
- Views: 448
Re: Manganese Bronze Valve Guides: Are there any benefits?
insurance. you really want to replace a 6,000 dollar motor for a 1 dollar piece of bronze. thats 20 years old mind you. or how about if you change it it's one more thing that might not go right due to substandard parts, poor install, etc... All of our engines have bucket and shim valvetrains, this ...
- Mon Nov 22, 2010 4:43 pm
- Forum: Engine - 16V
- Topic: 7AGE
- Replies: 57
- Views: 4815
Re: 7AGE
yes I suggest it, you then need to make the choice on which model of pistons on how much boost you want to run
- Sat Nov 20, 2010 6:30 pm
- Forum: Engine - 16V
- Topic: 7AGE
- Replies: 57
- Views: 4815
Re: 7AGE
I thought it would be interference because the FE head has a 22 degree valve angle with recessed valves vs the 50 of the 16V 4age. This will very likely mean the edges of the valves would hit. Also what I suspected was right, I had a look and the ring lands of 7afe pistons are thin, I wouldn't be gi...
- Fri Nov 19, 2010 5:12 pm
- Forum: Engine - 16V
- Topic: 7AGE
- Replies: 57
- Views: 4815
Re: 7AGE
I forgot to mention that using 7A pistons might make the engine an inteference design, also they wouldn't be very strong compared to ZE pistons
- Wed Oct 27, 2010 8:54 am
- Forum: Engine - 20V
- Topic: 7AGE w/ BT 20v head
- Replies: 7
- Views: 659
Re: 7AGE w/ BT 20v head
Are aftermarket rods/pistons easily available?- yes
Is a different/aftermarket crank necessary?- no
Regular machine shop able to do the work and assemble the bottom end?- no machine shop is needed unless your reboring
How high would i be able to rev? about 8000 or so with aftermarket rods
Is a different/aftermarket crank necessary?- no
Regular machine shop able to do the work and assemble the bottom end?- no machine shop is needed unless your reboring
How high would i be able to rev? about 8000 or so with aftermarket rods
- Tue Oct 26, 2010 11:59 pm
- Forum: Commercial Sales
- Topic: NST W58 into 4AG AE86 ADAPTER FEELER thread
- Replies: 33
- Views: 2459
Re: NST W58 into 4AG AE86 ADAPTER FEELER thread
am i missing something here?
- Tue Oct 26, 2010 6:59 am
- Forum: Engine - 20V
- Topic: can i use the 16v oil pan gasket for a 20v?
- Replies: 7
- Views: 533
Re: can i use the 16v oil pan gasket for a 20v?
if you have oil on your sump then chances are is your front crank seal.
Yes toyota silicone
Yes toyota silicone
- Tue Oct 26, 2010 1:55 am
- Forum: Commercial Sales
- Topic: NST W58 into 4AG AE86 ADAPTER FEELER thread
- Replies: 33
- Views: 2459
Re: NST W58 into 4AG AE86 ADAPTER FEELER thread
are you going to sell spigot bearing spacers to suit? or just use a dual row bearing?
I might be interested in a bulk purchase of these to be a reseller here in Australia, either that or a swap for some 20V cooling parts.
I might be interested in a bulk purchase of these to be a reseller here in Australia, either that or a swap for some 20V cooling parts.
- Tue Oct 26, 2010 12:43 am
- Forum: Engine - 20V
- Topic: can i use the 16v oil pan gasket for a 20v?
- Replies: 7
- Views: 533
Re: can i use the 16v oil pan gasket for a 20v?
A-series engines dont use an oil pan gasket.
- Sat Oct 23, 2010 6:32 pm
- Forum: Engine - 20V
- Topic: 20v pictorial of sensors, connectors, etc...
- Replies: 18
- Views: 1526
Re: 20v pictorial of sensors, connectors, etc...
not without the blacktop loom and ecu you won't.
- Thu Oct 14, 2010 1:59 am
- Forum: Engine - 16V
- Topic: 7AGE
- Replies: 57
- Views: 4815
Re: 7AGE
you have to be very carefull using the 7afe gasket with 4age pistons as the gasket is made for pistons with a lower compression height. 10:1 is a good compromise between power and response. Compared to an engine with 8.5:1 it will be much more responsive. moorofit: while your right about raising the...