www.86garage.com

have tvis plate with the butterfly valves and actuator for large port engine $40. Also have tvis intake manifold for a fwd placement engine. 832-788-7299

have a 5 speed fwd transmission off of a n/a mr2 c51 100$

832 788 7299

silvertop 20v engine all cylinders good compression, includes tweaked performance harness with braided sleeving blacktop auto ecu, sq engineeringsq engineering distributor relocation kit, and latest version 3 water line relocation kit. all sensors included. will not come with stacks or header pictur...

i got a 20valve silvertop and it runs extremely low on power only does 40mph max, people keep telling me its the ecu capacitor's i checked the ecu and it looks like 2 of them are leaking this coffee colored gel like substance does anyone have a 20v silvertop ecu i can try on my car to see if it fixe...

adjustable t3 lca's for the ae86 and adjustable t3 te27 tension rods works for ae86 just shorter allowing you to pull more caster, Used for no more than 500 miles. Asking 350$ for both

832-788-7299

I am looking to buy a first gen 79-81 supra straight axle rear end, please contact me at 832 788 7299.

when i give my car full throttle in gear and watch the rpm gauge climb the needle bounces or shuffles a bit while its climbing. Anyone else had this happen before? ive got a new clutch and lightweight flywheel but it does not feel like the clutch is slipping when i just give it gas in gear so i don'...

http://www.biblio.com/search.php?stage=1&pageper=20&keyisbn=corolla+manual&omit_product_types=bp,bd,ns&strip_common=1&program=1005&order=relevance" onclick="window.open(this.href);return false; They have some manuals real cheap on this site its a great website. Just bought the haynes 1980-1987 rear ...

happy 86 day, we should have had something at least like a mini meet planned for today.

i have one toyo proxes t1r 195/45/14, i bought a few years back and only did a few laps and one side blew out i have had this one ever since. It is still almost brand new the sides show a little wear but thats because its soft compound still has plenty of meat and brand new paint markings. maybe som...

thanks i got what i need, had a stuck open injector and the new ones were missing the grommets

Anyone know a good place to get the injector seals that sits between it and the head?

it works, i just bought a hex die m14x1.5 u can turn with a wrench for 11 bux off ebay and greased up the x83 inners and cut maybe 2.5 inches of new threads you have to be patient as it will take some time to finish turning the die and cutting the new threads, then i just cut the excess off works go...